Culver City · West Adams · Mid-City · Beverly Hills

Range Rover Auto Body Collision Repair in Los Angeles

AZ Auto Collision Center provides Range Rover auto body collision repair in Los Angeles for damaged luxury SUV panels, bumpers, doors, and exterior finishes. We assess body alignment, flush-fit exterior parts, and model-specific trim before recommending repairs or replacements. Our team offers free written estimates and assistance with insurance claims.
Free estimates · All insurance accepted · All makes & models · Limited lifetime warranty on paint and bodywork
Before: Range Rover Auto Body Collision Repair example before repair
After: Range Rover Auto Body Collision Repair example after repair
Before After
Drag to compare.

Range Rover Models We Repair

We handle eligible exterior bodywork on full-size Range Rover, Range Rover Sport, Velar, and Evoque models, including long-wheelbase, Autobiography, Dynamic, and SV versions where applicable. We also assess older Range Rover SUVs. Defender and Discovery body repairs have their own Land Rover page.

Range Rover Auto Body Shop Near Culver City

Our shop on S La Cienega Blvd is a convenient Range Rover body shop near you. We help drivers in Culver City, West Adams, Mid-City, Beverly Hills, Santa Monica, and West Hollywood.

Location
2001 S La Cienega Blvd, Los Angeles, CA 90034
Hours
Mon–Fri: 9:00 AM – 7:00 PM
Sat–Sun: by appointment only

Our Range Rover Auto Body Collision Repair Services

Special offer

Get a $500 Gift Certificate

Offer terms are set per campaign. Ask your estimator for the current conditions when you book.

Why Choose AZ Auto Collision Center

  • Correct Model and Trim Identification

    We distinguish full-size Range Rover, Sport, Velar, and Evoque body parts before ordering grilles, tailgates, doors, or exterior moldings.

  • Attention to Flush Exterior Components

    Our estimates account for visible panel gaps, retracting handle mounts, and fit around light and trim assemblies where applicable.

  • Body Repair Equipment

    We have a frame machine and aluminum welding equipment for eligible body repairs. We confirm the required procedures for each repair before work begins.

  • Color Matching and Finish Checks

    We evaluate the existing paint and use computerized color matching, including on vehicles with contrast roofs or specialty exterior finishes.

  • Written Estimates and Insurance Support

    Our team documents the damage, explains parts options, and helps coordinate supplemental estimates and repair approvals.

  • Limited Lifetime Warranty

    Qualifying paint and bodywork carry a limited lifetime warranty for as long as you own the vehicle, subject to warranty terms.

Our Repair Process

  1. Book Your Estimate

    Send us photos or visit our Los Angeles shop to discuss the damaged panels and receive a preliminary estimate.

  2. Fit and Damage Inspection

    We examine the affected body sections, trim, and accessible mounts, noting any areas that need further inspection.

  3. Agree on Parts and Work

    We review replacement options, refinishing, and insurance paperwork before you authorize the repairs.

  4. Repair the Bodywork

    Our technicians complete eligible panel work and install approved parts within the confirmed repair scope.

  5. Refinish and Refit Components

    We paint the repaired sections and reinstall doors, tailgates, exterior trim, and other affected components.

  6. Final Quality Inspection

    We check paint consistency, exterior alignment, trim fit, and the operation of affected closures before returning your Range Rover.

Recent Range Rover Auto Body Repair Projects

View More Repair Projects →
  • Chevrolet Equinox: Rear-corner collision damage
    Rear-corner collision damage Chevrolet Equinox
  • Porsche 911: Quarter-panel bodywork preparation
    Quarter-panel bodywork preparation Porsche 911
  • Porsche 911: Hood surface inspection
    Hood surface inspection Porsche 911

About Our Shop

At our Los Angeles body shop, Range Rover owners can arrange an assessment of damaged exterior panels, trim, and paint. We provide auto body and collision repair for Range Rover vehicles and other makes, with a written estimate before work begins.

We pay attention to the details that distinguish the Range Rover family, including deployable door handles, closely fitted exterior trim, and different tailgate designs across models. Our team identifies the damaged components and discusses compatible replacement options and refinishing requirements before work begins.

We help with insurance documentation, explain the expected repair schedule, and review any additional work with you before proceeding.

Range Rover Body Repair Questions

Can you repair the split tailgate on a full-size Range Rover?

We inspect the upper and lower sections, hinges, latches, and rear body opening. A rear impact can shift the alignment of one section or damage the mounts between them. We identify the bodywork and replacement parts needed and check both tailgate sections after reassembly.

Does the Range Rover Sport use the same tailgate as the full-size Range Rover?

No. The current Range Rover Sport has a powered single-piece liftgate, while the full-size Range Rover has a two-piece split tailgate. We identify your exact model before ordering parts and checking the affected hinges, latches, and rear-opening alignment.

Can you repair a Velar door if its flush handle no longer deploys?

We inspect the door skin, handle pocket, mounting points, and adjoining bodywork. A collision can damage the panel fit or handle attachments. We explain the body repairs needed and identify any separate checks or replacement parts for the deployable-handle mechanism.

Can you replace a damaged Range Rover rear lamp without replacing the body panel?

Sometimes. We check the lamp housing, mounting brackets, and adjacent trim to determine what can be replaced separately. On newer full-size models, the rear lamps sit within a distinctive dark exterior panel, so we also inspect those attachments and panel alignment before ordering parts.

Can you repair a dented Range Rover aluminum body panel?

We assess the aluminum panel's material, dent location, edges, and adjacent joints. Some exterior damage may qualify for a controlled repair; torn metal or damage to a structural connection can require replacement. We review the appropriate method before giving you a final recommendation.

Can you match Range Rover paint with a contrasting roof?

Yes. We identify the body and roof colors separately, compare them with the existing finish, and use computerized color matching to plan the paintwork. Contrast-roof repairs may need different preparation and masking from a single-color panel repair. We explain the refinishing area in the estimate.

Does front bumper damage require checks of Range Rover driver-assistance equipment?

It can. We inspect the bumper, grille, sensor brackets, and adjacent body components. If the impact affected the mounting position of radar or cameras, we identify the applicable diagnostics or calibration requirements. We explain any additional work before completing the body repairs.

Can I discuss genuine Range Rover parts before approving the repair?

Yes. We identify replacement parts by model year and equipment, then explain genuine parts options, compatibility, and availability. Some specialized components have particular installation requirements. We review the proposed parts and labor with you before ordering or starting the work.

Need Range Rover Auto Body Repair in Los Angeles?

Schedule a free written estimate for Range Rover body damage, exterior trim, or paintwork at AZ Auto Collision Center. Ask about towing or pickup assistance if you can't drive your SUV safely.

What Our Customers Say

Get your free estimate

What does your vehicle need?

What do you need help with? (required)
Is this damage from an accident? (optional)
Can the vehicle be driven safely? (optional)

If you are unsure, do not drive it.

Paying through insurance? (optional)
Have you filed an insurance claim? (optional)

Do not enter claim numbers in this form.

Tell us about the vehicle.

Year, make, and model help the estimator quote parts accurately.

Show us the damage.

Describe the damage below. Photos help too.

Up to 6 photos, 5 MB each. A whole-vehicle photo plus close-ups of each damaged area helps most.

No photos attached yet.

Tell us what happened and what is damaged, in at least 20 characters.

How should we contact you?

A name and a number is all we need. An estimator calls you back.

US numbers format as you type. Start with + for an international number.

An estimator will call you back during business hours.

By submitting, you ask AZ Wraps Inc to contact you about this estimate. Your details and photos are delivered to us by Web3Forms, our form delivery service. Read our privacy notice (opens in a new tab). An estimate from photos is an initial assessment; a final estimate may require an in-person inspection.